
Step 5: Install the Hood Liner
1)
Align both ends of the liner
assembly with the ends of the rough-
in plate.
2)
Insert the back ends of the liner
assembly into the rough-in plate and
push the liner assembly toward the
wall.
3)
Using the hex nuts provided with
rough-in plate, secure the liner
assembly to the rough-in plate.
4)
Install remaining #10 x 2" screws
in the lower section of the liner.
Verify that wall studs or framing are
engaged. Wall anchors are required if
the screws will not hit the wall stud.
9
Step 4: Install the Rough-In Plate
1)
Use rough-in plate assembly to
determine stud locations.
2)
Install #10 x 2" screws through
rough-in plate into wall framing.
3)
If additional mounting holes are
required for adequate liner support,
drill additional mounting holes in
rough-in plate and use these holes to
attach rough-in plate assembly to
wall framing.
Hood Liner Installation
MOUNTING
HOLES
ROUGH-IN
PLATE
SOFFIT
CAUTION
Note the weight of the hood
liner. Three people may be
required for proper installa-
tion.
CAUTION
If wall framing is not avail-
able, wall anchors must be
used.