wolfappliance.com | 11
BOOST MODE (INDUCTION)
For induction cooktops, boost mode boosts power on one
element by diverting power from an adjacent element.
If the adjacent element is on high, the power output will
be reduced. The reduction in power is displayed on the
power level indicator of the adjacent element. Refer to the
illustration below.
illuminates when an element is in
boost mode.
Boost mode deactivates automatically after approximately
15 minutes of continuous operation and can be reactivated
if desired.
Cooktop Operation
SINGLE ELEMENT AND INNER ZONE
Setting controls:
1
To activate a heating element, touch On/Off for the
desired single element on the control panel. The power
level indicator will flash and all indicators for that zone
will flash. Refer to the illustration below.
2
To complete the activation, touch Hi for highest heat,
Sim (Mlt) for lowest heat, Boost (induction) to activate
boost mode, or touch the desired power level indicator.
3
To change the heat setting while the element is on,
touch or slide to the desired power level.
4
To turn the element off, touch On/Off.
IMPORTANT NOTE:
For induction cooktops only, if
nocookware or an incompatible pan is placed on an induc-
tion element after activation, the control will flash for 30
seconds, then the element will turn off automatically.
Element activation
ON/OFF
Boost mode
BOOST
Cooktop Operation
