Page 8
LIGHT MODULE REMOVAL
To access the light modules on a Contemporary model, remove
the knobs and bezels.
WARNING
Turn off the power to the product before starting this
procedure.
Remove the Knob
Pull the knob away from the unit.
Remove the Bezel
Use a
3
/
4
" socket to remove the bezel from the unit.
Remove the Light Module
1
Pull the light module forward out of the receptacle.
2
Disconnect the AC-DC rectifier wire connector from the light
module.
LIGHT MODULE INSTALLATION
Install the Light Module
1
Connect the AC-DC rectifier to the light module.
2
Insert the tabs of the light module into the receptacle.
3
Push the light module into the receptacle.
Install the Bezel
1
Insert the bezel into the unit.
2
Use a
3
/
4
" socket to install the bezel on the unit.
Install the Knob
Push the knob onto the valve shaft.
BURNER ASSEMBLY REMOVAL
To remove a burner assembly, first remove the burner grate and
burner cap.
CAUTION
The unit might be supported by the burner pan. The
unit must be uninstalled if more than one burner
assembly or the burner pan is being removed.
WARNING
Turn off the power to the product before starting this
procedure.
CG Contemporary Gas Cooktop Service Manual
service.subzero.com
828389 REV. A 06/2018
7
