Wolf Steel Continental C95 - B SERIES, Installation And Operating Manual

Page: 3 / 76

W415-1245 / B / 03.19.15
3
IOM
1.0 INTRODUCTION
NOTE: Changes, other than editorial, are denoted by a vertical line in the margin.
18.0 AIR FLOW 48
18.1 TEMPERATURE RISE CHECK 48
18.2 CALCULATING AIR FLOW 49
18.3 CONTINUOUS FAN OPERATION 49
19.0 MAINTENANCE AND TROUBLESHOOTING 50
19.1 AIR FILTER 50
19.2 LUBRICATION 50
19.3 TROUBLESHOOTING FLOWCHART 51
19.4 DIAGNOSTIC CODES FOR STATUS LED 52
19.5 FAULT CODE HISTORY 52
20.0 WIRE DIAGRAM FOR SINGLE STAGE FURNACE 53
20.1 SINGLE STAGE FURNACE WITH PSC 53
20.2 SINGLE STAGE FURNACE WITH X13 54
21.0 WARRANTY 55
22.0 SINGLE STAGE REPLACEMENT PARTS LIST 56
23.0 SERVICE HISTORY 58
H4.0.4
This high ef fi cient gas fi red single stage condensing furnace is an up fl ow, down fl ow, horizontal left and right
warm air furnace suitable for residential and light commercial heating applications with inputs from 30,000 to
120,000 Btu/hr.
This high ef
fi cient furnace series is CSA certi fi ed as a Category IV indirect or direct vent central forced air
furnace. When installed as a direct vent furnace, all combustion air is supplied to the furnace burners through the
air intake system.
(See Section 7, “Ventilation and Combustion Piping.”)
All models may be fi red by natural or LP gas (propane), and may be fi eld converted from natural gas to LP gas
using Conversion Kit W370-0018.
The furnace is shipped completely assembled except for the condensate drain trap assembly. Please inspect
for damage when the furnace is unpacked.
H1.22
IMPORTANT:
PLEASE READ THIS MANUAL CAREFULLY
AND KEEP IN A SAFE PLACE FOR FUTURE
REFERENCE BY A SERVICE TECHNICIAN.
ATTENTION:
UPFLOW VENTING RIGHT, MUST DRAIN ON
LEFT SIDE.