Wolf Garten 7080000, Original Operating Instructions

Page: 13 / 128

13
G
Cleaning or replacing the blade
3
Blunt blades should not be resharpened but replaced.
1. Lift the locking mechanism (1) and pull the sliding shoe away
to the back (2).
2. Remove the blade from the battery-powered shears.
3. Grease the plastic ring of the blade
using petroleum jelly.
4. Clean the visible part of the gearbox and lubricate it with grease
if necessary.
5. Fix the blades in place on the gearbox cover
.
6. Slide the sliding shoe over the battery-powered shears until the
locking mechanism engages (blade will automatically
snap into the gearbox).
Troubleshooting
Warranty
The warranty rules issued by our company or the importer apply to
every country. As part of the warranty, we remedy malfunctions on
your appliance free of charge provided that this malfunction is
caused by a material or manufacturing defect. In the event of a
warranty claim, please turn to your dealer or the nearest branch
office.
D E F G H
D
F
E
G H
Problem: Possible causes: Remedy:
Blades run hot
• Blade is blunt • Replacing the blade
• too much friction due to insufficient lubrication
• Use petroleum jelly to grease the plastic ring of the
blades
Motor fails to start
• Battery flat • Recharge battery
• Battery defective • Take the unit to the WOLF-Garten service workshop
Problems when
charging the battery
• Battery or charger defective • Take the unit to the WOLF-Garten service workshop
Jerky run, machine
heavily vibrating
• Blade damaged • Replacing the blade
If in doubt, bring your tool to a WOLF-Garten service workshop.
1
Switch off the battery-powered shears before examining them or working on the blade.