MOTUS®C14 Operating Instructions
Page
72
of
73
94 762 000 B
Revision 03.2022
General data
Mounting position
vertical (horizontal DIN rail, motor output below)
Mounting
alignable, for spacing see Derating
Operation mode
100 % ED
Protection class
IP20
Power Loss min./max.
6 W / 11 W (2,6 A), 21 W (6,6 A)
Dimensions W / H / D
22,5 mm / 160 mm / 132,5 mm
Warning relay
NO: 277 Vac, 1 A
30 Vdc, 2 A (4 A up to 40 °C)
Error relay
CO: 277 Vac, 1 A
30 Vdc, 2 A (4 A up to 40 °C)
Insulation properties
Rated insulation voltage
500 V
Rated surge voltage
4 kV
Overvoltage category (incl. requirement for safe separation)
at maximum rated operational voltage to earth ≤ 300 V
I - III
at maximum rated operational voltage to earth ≤ 500 V
I - II
Overvoltage category (without requirement for safe separation)
at maximum rated operational voltage to earth ≤ 300 V
I - IV
at maximum rated operational voltage to earth ≤ 500 V
I - III
Degree of pollution
2
Connection data
Designation of connection
Control circuit
Connection type
Push-in connection
Conductor cross section flexible without ferrule
0,2 - 1,5 mm²/AWG 24 - 16
Conductor cross section flexible with ferrule
without plastic sleeve
0,25 - 1,5 mm²/AWG 24 - 16
Conductor cross section flexible with ferrule with
plastic sleeve
0,14 - 0,75 mm²/AWG 26 - 18
Conductor cross section solid
0,2 - 1,5 mm²/AWG 24 - 16
Stripping length
10 mm
Designation of connection
Load circuit
Connection type
Screw connection
Tightening torque
0,5 - 0,6 Nm / 5 lb
f
-in. - 7 lb
f
-in.
Conductor cross section flexible without ferrule
0,2 - 2,5 mm² (f)/AWG 24 - 12
Conductor cross section flexible with ferrule
without plastic sleeve
0,2 - 2,5 mm² (f+AE)/AWG 24 - 14
Conductor cross section flexible with ferrule with
plastic sleeve
0,2 - 2,5 mm² (f+AE)/AWG 24 - 14
Conductor cross section solid
0,2 - 2,5 mm² (re)/AWG 24 - 14
Stripping length
8 mm
Ambient conditions
Ambient temperature (operation)
-5 °C - +55 °C (note derating)
Relative humidity r.H.
5 - 95 %, non condensing
Ambient temperature (storage/transport)
-40 °C - +70 °C
Standards / regulations
Standards
IEC / EN 60947-4-2
IEC / EN 60947-1
UL approval
E510845
For use with Adapters
MCC-60-2, MCC-30-2, MCC-PA-2