Wöhner Motus C14, Operating Instructions Manual, Page: 66 / 74

MOTUS®C14 Operating Instructions
Page
66 of 73 94 762 000 B Revision 03.2022
21 Serial Number max 16 Bytes RO 00001*
22 Hardware Revision max 64 Bytes RO 01:06:07* (CB:PB:DB)
23 Firmware Revision max 64 Bytes RO V0.6.0.3*
24 Application Specific
Tag 32 Bytes RW "***" (string)
25 Function Tag 32 Bytes RW "***" (string)
26 Location Tag 32 Bytes RW "***" (string)
32 Error Count 2 Bytes RO -
36 Device Status 1 Byte RO - (current device status)
37 Detailed Device Status 21 Bytes RO - (currently pending events)
40 Process Data Input 10 Bytes RO -
41 Process Data Output 1 Byte RO -
* Example
21.4 Acyclic process data (ISDU-Parameter)
– Device specific
21.4.1 Device
– Configuration
ISDU-
Index
Name
Data-
type Length
(Bytes)
Description Access
256 Operation mode uint8 1 0: 3~ operation
1: 1~ operation Read
Write
302 Automatic error
acknowledgement in
case of overload uint8 1 0: Disabled
1: Enabled
Automatic error
acknowledgement in
case the thermal load
falls below 75% and an
overload error was
triggered previously Read
Write
21.4.2 Device
– Measurement
ISDU-
Index
Name
Data-
type Length
(Bytes)
Description Access
68 Load current L1
(RMS) uint16 2 Unit in 100mA Read only
69 Load current L2
(RMS) uint16 2 Unit in 100mA Read only
70 Load current L3
(RMS) uint16 2 Unit in 100mA Read only
71 Supply voltage L1
(RMS) uint16 2 Unit in 10mV Read only
72 Supply voltage L2
(RMS) uint16 2 Unit in 10mV Read only
73 Supply voltage L3
(RMS) uint16 2 Unit in 10mV Read only
21.4.3 Three-Phase Operation
– Configuration
ISDU-
Index
Name Datatype
Length
(Bytes)
Description Access
66 Nominal current uint8 1 Unit in 100mA Read