8 21 10 0:
R MT-1 73 S e r ie s U se r G u id e
© 20 13 Wo hl e r Te c hn ol og i e s , In c . A l l r ig h ts re se rv ed .
3
RMT-173 Series
I n s t a l l a t i o n R e c om m e n d a t i o n s
Safety Symbols
Installation Recommendations
Heat Dissipation
The ambient temperature around the unit should not exceed 40
°
Celsius (104
°
Fahrenheit). Allow plenty of space around the unit for air
circulation.
Mounting/Bracing
A table top (-TT) stand or rack mount (-RM) kit may be provided. A
standard VESA 100 mounting hole pattern is provided on the back of
the unit for use with other mounts (not supplied).
Refer to
Mounting on page 5
for instructions on attaching the desktop
stand.
Connections and Cable Recommendations
We recommend that you limit the length of the cables that you use for
feeding HD-SDI signals sources to the HD-SDI inputs of the RMT-173
Series units and that you use a Belden 1694A cable (or equivalent). The
HD-SDI inputs (
IN1
and
IN2
) can be up to 150 meters (492 feet) in
length for 1.5 Gbps (HD), more for 270 Mbps (SD) and less for 3Gbps.
WARNING:
The symbol to the left warns of electric shock hazard inside the unit.
Disconnect the power cord before removing access panels when
installing upgrades. Only qualified service personnel are to operate the
equipment with covers removed, and are to exercise caution to avoid
personal injury.
USO
RESTRITO