Wohler RMT-173-RM, User Manual, Page: 32 / 34

8 21 10 0 : RM T-1 73 S e r ie s U s e r G ui d e
© 2 01 3 Woh le r Te ch no lo g ie s, Inc . A ll ri g ht s re s e r v ed .
30
RM T - 1 73 Se r i e s
Sp e ci fi ca t i o n s
Table 1–16 below lists the I/O specifications.
Table 1–17 below distinguishes each of the RMT-173 models.
Table 1–18 below lists the specifications for CVBS inputs.
Table 1–16 RMT-173 I/O Specifications
Specification RMT-173 Values
Video Inputs
• 6 BNCs: CVBS, S-Video, YPbPr, 3G/
HD/SD-SDI (supports embedded
audio)
• HDMI
Video Outputs 6 BNCs: Loop out of BNC In
Audio Inputs 4 RCAs: Analog stereo for EXT sources
Audio Outputs
2 RCAs: Analog stereo (monitoring, same
as speakers)
Table 1–17 RMT-173 Distinctions Among Each Model
Category Specification 3G HD SD A
3G-A SDI
SMPTE 424M
1080p: (60/59.94/50)
HD-SDI
SMPTE 292M,
296M
1080p: (23.98, 24, 25,
29.97, 30)
1080i: (60/59.94/50)
1035i: (60/59.94)\
720p: (60/59.94/50)
SD-SDI
SMPTE 259M 480i: (60/59.94)
576i: (50)
Analog
PAL
NTSC
Note: 1080psF may display as the equivalent 1080i rates listed
above. Segmented-Frame (sF) scan is not supported.
Table 1–18 RMT-173 CVBS I/O Specifications
Specification RMT-173 Values
Signal Type NTSC, PAL
Signal Amplitude 1V peak-to-peak ±3 dB
Impedance 75
Ω
Return Loss > 40 dB ±5 MHz
DC Offset 0V ±0.05 V
Frequency Response ±0.2 dB to 5 MHz
USO
RESTRITO