Page 61
Output Routing
The
Output Routing
licensed feature (OPT-OUTPUT-ROUTING) allows channels to
be routed or combined and routed in custom ways to various destination outputs.
Output Routing
is applied to:
1. Signals monitored using "Input Source select" from the Front Panel,
2. Presets that have been created to apply the Output Routing.
Any change to the routing will affect the Presets that have "Apply Output Routing"
selected. For example, multiple channels of a 7.1 channel program can be
combined and directed to the left or right internal speakers. Six or eight channels
could be directed to the AES outputs, which could feed an external surround sound
system. Contact Wohler Sales to purchase the license for the OPT-OUTPUT-
ROUTING feature.
If
Output Routing
is not licensed, then any of the inputs can be monitored in
stereo or mono only through the internal speakers. The headphone jack, the analog
XLR outputs, and the first AES output will follow whatever is directed to the
speakers.
When licensed, select
Global
Output Routing
under
Configuration
. This will
display the
Global
Output Routing
screen. This screen contains a matrix of
checkboxes which are an easy way for you to set up the wide variety of input to
output routing and mixing capabilities. The
Global
Output Routing
screen is
shown in Figure 4-15.
Figure 4-15: Global Output Routing Option
Global Output
Routing
Destination
Outputs
Source
Inputs
Output
Options
iAM-AUDIO2-8
Destination Outputs
On the left of the
Global
Output Routing
screen are listed the Destination
Outputs. These are the outputs to which any input can be routed. They are as
follows:
