© 2006 Wohler Technologies Inc. ALL rights reserved
32
AMP-S8
User Manual P/N
821640
Rev-
B
User Interface Function Guide
Section 2:
Operation
Enabling Mute States:
Mute Button
Pressing the
MUTE Button
allows the user to step through three
mute
states and an
unmuted
state. When the system
is in one of the mute states, all other information normally shown in the
LCD Display
, such as the
Input Status
Display
, is
disabled
. All other buttons are disabled until the unit is taken out of the
Mute Mode
.
First
press mutes
both
speakers :
Mute LR
Second
press mutes the
Left
speaker :
Mute L
Third
press mutes the
Right
speaker :
Mute R
Fourth
press returns the unit to
Unmuted
(normal) operation.
Muting functions affect the signals to the speakers/headphones and the rear panel
Selected/Downmix Analog
Output Connectors
(
Item M
, page
14
). Muting does NOT affect the
Metered Analog Outputs
(
Item K
, page
14
),
except to defeat scaling. When speakers are muted, the gain scaling of the
Metered Analog Outputs
is defeated so that no
scaling is applied during unit muting. See the
Analog Output Preference
parameter in the
Setup Mode
section on page
30
for more information. The
Metered Analog Outputs
remain active even when the
mute
state is enabled.
Operational State Modes
