Menu
40
8.1
Device data
Fig. 36: “Device data” screen
In the “Device data” screen the user can enter
information about the heating system. He can
save this information together with the readings in
the customer folder.
•
Select a parameter.
Fig. 37: Entering the ph value
•
Enter the correspondent information.
•
Press OK to confirm.
NOTE!
The value to be entered must be within the preset
limits (in the example on the left between 0.0 and
14.0). If the value is not between the preset limits,
it will not be possible to confirm the value.
After confirming the analyzer will automatically
return to the device data screen.
•
To save the information, proceed as described
see chapter 7.
NOTE!
It is possible to save the information about the
heating system together with the readings.
