Using the Analyzer
36
Pumps off
•
Click on "Pumps OFF" to turn off the gas
pump and the CO protection pump.
Pumps on
•
Click on "Pumps on" to turn on the gas pump.
Purge on
•
If the measurement has stopped, click on
"Purge on"
In this case the sensors will be exposed to fresh
air without the need to remove the probe from the
stack.
Accept
The “Accept” icon will only appear if the meas-
urement is stopped.
•
Click on the "Accept" icon to enter the Read-
ings menu.
In the Readings menu you can save the readings
in a customer folder (see chapter 7).
Proceed
•
Click on "Proceed" to continue the measure-
ment.
