Wöhler BC 600 Operating Manual Download Page 66

Page: 66 / 83

Operating the Wöhler BC 600 via the app

8.8 Report: Certificate or

protocol

NOTE!

As the report is generated in PDF format, you will

need to install a PDF reader on your mobile de-

vice. We recommend Adobe Reader.

Fig. 63: Possibility to enter an individual

report titel

It is possible to create a detailed report once all of

the data has been entered, all measurements

have been carried out and the measurement re-

sults have been saved.

If the measurement result is

standard compliant

the report is issued as a measurement certificate.

If the measurement result is not

standard com-

pliant

the report is issued as a

measurement

protocol

It is possible to create an individual report title in

the settings.
Furthermore, the following items can be specified

in the settings, see Chapter 9.3.
Footer text, note text for the title page, the time of

the measurement in the report and standard

comments to be inserted frequently.
The evaluation of the measurement results can be

customized for the report under the following

items, see Chapter 9.3:
Derived quantity, axis classification, leakage

curve, percentage error, geometric reference

quantities.

8.8.1 Company logo on

report

If desired, it is possible to insert your company

logo in the report.
Logo format: jpg, .jpeg, .png, .tif

•

Load the logo onto your mobile device.

NOTE!

Save the logo to the folder of your choice.

•

Now open TESTER SELECTION. You have

two options to access this view:

a) Select CUSTOMER MANAGEMENT > Se-

lect Customer, Project, Object > TESTER

DATA

b) Tap the gear symbol to enter the Settings

view > GENERAL > Your contact data

Summary of Contents for BC 600




















































































Search results

Summary of Contents for BC 600

Reviews:

Related manuals for BC 600

Brands by name

Popular brands

Wöhler BC 600, Operating Manual

Search results

Summary of Contents for BC 600

Reviews:

Related manuals for BC 600

Brands by name

Popular brands