Operating the Wöhler BC 600 via the app
43
The WLAN key on the Wöhler BC 600 will now
light up permanently. > The WLAN connection
between the Wöhler BC 600 and the mobile de-
vice has been established.
•
You can now begin with measurements.
Special notes only for iOS users
If you use the "iCloud Keychain" function for sev-
eral Apple devices (e.g. iPhone, iPad), it may
happen that the device that is not currently used
automatically connects to the Wöhler BC 600 in-
stead of the desired one and blocks the desired
device.
•
In this case, ignore the network of the Wöhler
BC 600 on the device that is not used in order
to enable a reliable connection of the desired
device.
•
In the system settings for the Wöhler BC 600
app, activate the "Local network" authorisa-
tion.
•
Confirm the corresponding message dialogue,
otherwise no connection can be established.
•
Launch the Wöhler BC 600 app again and
select “One device”.
NOTE!
If there are several Wöhler BC 600 devices in the
range of the mobile device, select the device with
the desired serial number from the suggested list.
The WLAN key on the Wöhler BC 600 will now
light up permanently. > The WLAN connection
between the Wöhler BC 600 and the mobile de-
vice has been established.
•
You can now begin with measurements
8.5.2 Measuring with
several Wöhler BC 600
devices
NOTE!
Measuring with several Wöhler BC 600 devices is
not yet possible with the current version of the
Wöhler BC 600 app. However, future versions of
the app will include multiple device mode func-
tionality.
