Operating manual
Page 19 of 32
B0102
GMI / GML / SAB / GOI
It is prohibited to remove, modify, bridge or bypass any and all
protection, safety or monitoring facilities.
It is prohibited to reconstruct or modify the unit.
The operator should be notified of any fault or damage
immediately.
For repair, no others than original spare parts may be used.
The operator is required to regularly check and maintain all
protection, safety, and monitoring facilities.
After every repair, the flawless condition of the unit must be
ensured by means of a test run.
5.8
Disclaimer
Should any damage be caused to persons, objects, the environment and/or property due to
the non-observance of this operation manual, no matter whether intentionally or
unintentionally, WOERNER shall be held harmless thereof. Besides, all warranty claims will
be rejected. The same also applies to any and all consequential damage.
6. Transportation, installation, commissioning and shutdown transport
6.1 Transportation
Transport the unit to its destination carefully and by using suitable aids.
6.2
Unpacking
Lift the unit out of its packaging carefully and put it on a stable and plane base.
Note!
The unit and the components attached in accordance with the
scope of delivery may still contain residues of blue-dyed test oil.
