Operating manual
Page 20 of 32
B0102
GMI / GML / SAB / GOI
6.3
Installation
The unit is ready for wall-mounting. It is to be secured by means of two M5 screws. The
mounting surface must be sufficiently stable in order to be capable of carrying the pump
unit’s weight including the filled reservoir.
Besides, it needs to be ensured that the
mounting surface is vertical and plane.
Drill scheme:
6.4
Power supply and switch-on
Important! Be careful to compare the data of the local voltage supply with
that given under "Technical data".
Important! Lay the power supply cable such that it cannot be torn off
inadvertently.
Important! Work on electric facilities may only be performed by skilled
electricians in conformity with DIN VDE 1000-10.
Connect the unit to the voltage supply and control.
Check the electric connections for correct installation prior to commissioning.
Caution!
Work on electric facilities implies danger to life!
Electrical connection diagram s
Solenoid
A/W1 and C/W1
A/G 1
Level sw itch
Function control 1
Alternating voltage
Direct voltage
NO contact
NC contact
30
