1.2
Checklist for setup
Update software to current status
(only possible with laptop program “KonfigTool”)
Set descaling filter (if existent) and filter range
(Service program
machine data or "KonfigTool“
Machine configuration
counter page)
Set expert mode for customer (machine data
Access
control
expert or "KonfigTool“
machine configuration
PIN page)
Perform Brewer calibration (service program
service
routines)
Calibrate portioners (service program
service
routines)
Recommendation:
Adjust milk temperature using nozzle and pinch valve
Adjust foam quality and temperature using nozzle and
under
Setting
foam quality
Set recipes or transfer the given standards to the
machine
Set button functions and beverages according to
customer specifications
(Settings or “KonfigTool“
beverage data)
Set cup volumes (Setting)
Tip: If the filling amount setting is too small for large
vessels, use the "pot" recipe
Set sequence of additions according to customer
specifications (recipes and buttons/additions)
Enter service point
(only possible with “KonfigTool”).
Save data in service memory (Service Program
Machine data
Standards
Customer
Service)
Backup machine data on laptop
Expert can confirm customer
check-up and filter exchange and
set the filter range in the Settings
menu.
Fine settings beverages under
changing recipes:
Amount of coffee powder
Amount of water
Amount of foam
Amount of milk
Foam quality
Brewing temperature
Additional settings after the
service PIN is entered
6
Service manual WMF bistro! Edition 08/2011
WMF bistro! Service manual
