30
User Manual WMF 5000 S
Software | Ready to operate
4.2.2 SteamJet cup warmer
Burn hazard / scalding hazard
• Hot steam is produced by the SteamJet cup
warmer. The cups and adjacent surfaces also
get very hot.
> Use heat-resistant cups.
> Always place a cup upside-down over the
cup warmer before dispensing steam.
> Do not touch the adjacent surfaces
immediately after dispensing.
> Do not touch the spouts immediately after
dispensing.
> Never use the SteamJet function without
the drip tray grid in place or without the cup
warmer insert.
Health hazard / hygiene
• The SteamJet function is intended for
warming the drinking vessel and is not
intended to be used for cleaning.
> Always use freshly washed drinking vessels
when warming cups.
The SteamJet cup warmer can use steam to warm up
to 2 cups at the same time.
Place a cup on the cup warmer with the opening
facing downward
Touch the pad
Hot steam slowly flows into the cup from below.
The jet of steam stays on for the time set in the
settings.
Touch the SteamJet button again
The steam jet stops immediately.
CaUtion
Follow the Safety chapter
w
starting on page 6
Clean drip tray daily
Care
w
starting on page 57
CaUtion
Follow the Safety chapter
w
starting on page 6
SteamJet pad active / inactive
w
Operating options
page 42