WMF 10, User Manual

Page: 92 / 212

Caring for the coffee pad machine.
33
>
Unscrew the red steam nozzle ( 2 ) out of the steam outlet ( 3 ). To do so, if required, use the hexagonal
spanner ( 4 ) in the handle ( 1 ) of the milk foamer.
>
Check whether the hole of the steam nozzle is clear.
>
If required, soak the steam nozzle in descaling solution for about 30 minutes.
>
Start a rinsing operation without the steam nozzle, as described in Chapter “5.3 Rinsing” on page 26 ff.
Hazard!
Danger of scalding!
Hot steam is generated during rinsing.
>
Do not touch below the steam outlet during the rinsing.
> Switch off the appliance and let it cool for 5 minutes before you continue.
>
Only after the cooling period, screw the steam nozzle back into the steam outlet (3).
5.5 Descaling
Descale your coffee pad machine regularly so that it works faultlessly.
5.5.1 Scaling display
Your appliance has an automatic scaling detector. When you must descale the machine, the descaling
button flashes.
Depending on the coffee consumption and water hardness, you will be prompted to descale even after
4 to 10 weeks. After the descaling button has flashed once, the appliance will be blocked after 50 more
beverage preparations.
When it gets blocked, the scaling indication and the illuminated cross flash together.
>
Descale the appliance.
For protection against intense scaling, the appliance is preset for very hard water.