WMF 10, User Manual

Page: 72 / 212

Operation
13
>
Fill a milk container with cooled milk up to a maximum of height of 15 cm.
>
Place the milk container on the right next to the appliance.
>
Insert the WMF milk connector until it comes to rest in the opening on the right-hand side.
>
Submerge the end of the milk hose in the milk.
The end of the milk hose should reach down to the bottom of the milk container, so that no air is sucked in.
3.3 Coffee preparation
>
Fill fresh tap water every day into the water tank.
You can very easily get your favourite coffee beverage by using commercial coffee pads. How to insert
the coffee pads in the pad cassette is explained in Chapter 3.3.1 on page 14 ff. You can also enjoy freshly
ground coffee. To do so, instead of the coffee pads, use the ground coffee cassette as described in
Chapter 3.3.2 on page 16 ff.
Caution!
Functional fault owing to blockage of the pad cassette.
Damaged pads, loose coffee powder or instant coffee can block the pad cassette. The locking knob gets
blocked and the pad cassette cannot be removed any more.
> Only insert suitable coffee pads or the ground coffee cassette in the pad cassette.
> Never insert damaged pads, loose coffee powder or instant coffee in the pad cassette.
> Check each time before brewing coffee, whether
- the opening in the middle of the pad cassette is free,
- the pads are undamaged and
- the pad cassette is free of ground coffee residue.