WL-G510 Series Router User Manual
9
The serial port will be unavailable in WL-G510 standalone GPS model.
1.4.5 Console
Port Connection
Connect the router to a computer by an RJ45-DB9 cable for CLI configuration and router
system debugging.
Pin
Instruction
Remark
1
CTS
Input
2
RTS
Output
3
RXD
Input
4
TXD
Output
5
GND
GND
6
DSR
Input
7
DCD
Output
8
DTR
Output
1.4.6
Power Supply
Plug in power adaptor.Voltage input range:+7.5~32VDC. (Extended models: 7.5~ 48VDC)
1.4.7
Review
After insert the SIM/UIM card and connect Ethernet cable and antenna, connect power
supply adaptor or power cable.
Please connect the antenna before power on, otherwise the signal maybe poor
because of impedance mismatching.
Notice:
Step 1 Check the antenna connection.
Step 2 Check SIM/UIM card, confirm SIM/UIM card is available.
Step 3
Power on the industrial Router
----END
Summary of Contents for WL-G510 Series
Page 54: ...WL G510 Series Router User Manual 54 Figure 3 35 Trace GUI End...
Page 60: ...WL G510 Series Router User Manual 60 End...
Page 62: ...WL G510 Series Router User Manual 62...
Page 63: ...WL G510 Series Router User Manual 63 3 OpenVPN Client Config Demo...
