WLINK WL-G510 Series, User Manual

Page: 22 / 65

WL-G510 Series Router User Manual
22
Figure 3-10
Port Forwarding GUI
Table 3-7 “Port Forwarding” Instruction
Parameter Instruction
Protocol Support UDP, TCP, both UDP and TCP
Src. Address Source IP address. Forward only if from this address.
Ext. Ports External ports. The ports to be forwarded, as seen from the
WAN.
Int. Port Internal port. The destination port inside the LAN. If blank,
the destination port is the same as Ext Ports. Only one port
per entry is supported when forwarding to a different
internal port.
Int. Address
Internal Address. The destination address inside the LAN.
Description Remark the rule
Step 2 Please click ”save” to finish
----End
3.4.2 Port Redirecting
Step 1 Advanced Network > Port Redirecting to enter the GUI, you may modify the router
name, Host name and Domain name according to the application requirement.
Figure 3-11
Port Forwarding GUI
Table 3-8 “Port Redirecting” Instruction
Parameter Instruction
Protocol Support UDP, TCP, both UDP and TCP