WLINK WL-G510 Series, User Manual

Page: 17 / 65

WL-G510 Series Router User Manual
17
Figure 3-4
Dynamic DNS Setting
Table 3-3 DDNS Setting Instruction
parameter Instruction
IP address
Default is standard DDNS protocol, for customized protocol, please
contact Wlink engineer. Usually, use default IP 0.0.0.0
Auto refresh
time
Set the interval of the DDNS client obtains new IP, suggest 240s or
above
Service
provider
Select the DDNS service provider that listed.
Step 2 Please Click “Save“ to finish.
----End
3.2.5 Routing Setting
Step 1 Basic Network->Routing to enter the DDNS setting GUI.
Figure 3-5
Routing Setting
Table 3-4 Routing Setting Instruction
Parameter Instruction
Destination Router can reach the destination IP address.
Gateway Next hop IP address which the router will reach
Subnet Mask Subnet mask for destination IP address