WL-G510 Series Router User Manual
10
2
Router Configuration
WL-G510 Series routers support GUI and CLI configuration. This chapter introduce GUI
configuration via Ethernet port, if need CLI configuration guide, please contact our
technical support department by email: [email protected].
2.1
Local Configure
The router supports to be configured by local Ethernet port, you could specify a static IP or
set as DHCP. The default IP address is 192.168.1.1
，
subnet mask is 255.255.255.0,
please refer to followings:
Step 1
Click
“start > control panel”
,
find “Network Connections” icon and double click it to
enter, select “Local Area Connection” corresponding to the network card on this
page. Refer to the figure below.
Figure 2-3
Network Connection
Step 2
Obtain a IP address automatically or set up IP address,192.168.1.xxx(XXX can be
any number between 2
～
254)
Step 3
Run an Internet Explorer and visit “
http://192.168.1.1/
”, to enter identify page.
Summary of Contents for WL-G510 Series
Page 54: ...WL G510 Series Router User Manual 54 Figure 3 35 Trace GUI End...
Page 60: ...WL G510 Series Router User Manual 60 End...
Page 62: ...WL G510 Series Router User Manual 62...
Page 63: ...WL G510 Series Router User Manual 63 3 OpenVPN Client Config Demo...
