WLD-TEC Flame100, Instruction Manual

Page: 28 / 52

28
necessary, so that the flat head screwdriver
(R3)
can be inserted through the airholes
in the burner tube (5) . Using the screwdriver (R3) , loosen the burner tube (5) by turning
counter-clockwise and unscrew it completely.
Clean the removed burner tube and allow sufficient time to dry before assembling
again. Next, screw on the burner tube
(5)
again, insert the screwdriver
(R3
) through the
burner tube’s
(5)
airholes and tighten in clockwise direction.
Before tightening the burner tube (5), screw the air adjustment (3)
upwards over the burner tube’s (5) airholes sufficiently that the air
adjustment (3) does not get jammed and can be easily moved after
being retightened.
Finally, place the electrode holder (12) in a vertical position again, push the electrode
holder’s (12) cables carefully into the housing and tighten with the screw for the
electrode holder
(13)
. Take care not to jam the cables of the electrode holder.
!
7. Warranty
All WLD-TEC Bunsen burners are covered under our two-year manufacturer warranty
against any manufacture defects in material and workmanship. The WLD-TEC
warranty guarantees all Bunsen burners under normal usage conditions and does not
cover any damages as a direct result of user misuse or/and abuse. The warranty is
void upon any unauthorized servicing, disassembly or modifications.