25
W
izard CMC Model 8000 RC
Hardware and Software Getting Started Manual
CMC
8000RC/Frameshop
20-71034-1
GettingStartedManual8000RCFrameShop
http://info.wizardint.com/KB/default.aspx#pageid=getting_started_manual_8000_rc
04/05/19
not supported and potentially harmful to the operator.
Caution: The CMC should not be operated when operator is fatigued, under the influence of alcohol or narcotics, or
other medication where operating heavy machinery warnings are provided.
Caution: Due to the size and weight of the CMC, two people must perform identified installation operations. Noted
operations performed by a single person may result in injury.
Caution: The CMC contains moving parts that may cause injury if not operated in accordance with the instructions.
Only trained operators should operate machinery. Operators should not touch the CMC while it is cutting a mat.
Warning: Blades used within the CMC are sharp and will cause injury if not disposed of properly. Blades must be
disposed of in an appropriate sharps disposal container.
Warning: Hazardous voltages exist within the ECU. No user serviceable parts are located inside the ECU. Opening of
the ECU is prohibited.
Warning: Do not turn on ECU if board cable is disconnected on either end. Risk of electrical shock is present through
the ECU plug or non-terminated board cable.
© 2003, 2018 by Wizard International, Inc.
Documentation is provided “as is” and all express or implied conditions, representations, and warranties, including any
implied warranty of merchantability, fitness for a particular purpose or non-infringement, are disclaimed, except to the
extent that such disclaimers are held to be legally invalid.
