38
Translation of the original operation manual
DUOMIX 230
DM230_BAoDB_en_1307 · rs
Maintenance
Check the lubricant level every day as follows:
1.
Press up the slide on the oil reservoir and unscrew the oil reservoir by turn-
ing it anti-clockwise.
Take care of the O-ring that seals the oil reservoir. It may be displaced or
even fall out when disassembling
.
2.
Check whether the O-ring fits correctly – if necessary fit it correctly.
3.
Check whether there is enough lubricant – maximally filled the lubricant
reaches to a point approx. 2 cm below the upper edge of the oil reservoir.
4.
To up lubricant, if necessary.
We recommend to use pneumatic oil (order number 0632579) or the anti-
freeze agent (order number 0631387) from
WIWA
.
5.
Reattach the oil reservoir to the air maintenance unit.
6.3.2 Checking and adjusting the fog oiler
1.
Let the unit run slowly under load.
2.
Check in the fog oiler inspection glass whether 1 drop of lubricant is fed
after each 10 to 15 double strokes.
3.
If this is not the case, adjust the metering by turning the regulating screw
on the fog oiler with a screwdriver.
6.3.3 Checking and cleaning the water separator
The accumulated condensation water is automatically drained off through the
drain valve. For this purpose hold the hose into an empty collecting vessel.
Check the bowl regularly for dirt residues and clean it as required (disassembly
and assembly as with the oil reservoir).
6.4 Check release agent for material residues
Each of the 3 material pumps on the main pump contains approx. 100 ml of re-
lease agent. In order to check the release agent for material residues you must
drain off a small amount of release agent from the drain screws.
Filler openings
Drain screws
Fig. 34: Drain screws for release agent
Fig. 35: Filler openings for release agent
If the release agent is found to be contaminated with material residues you
must assume that the packing of the related material pump is worn. In this case
have the pump packing replaced as soon as possible.
Summary of Contents for Duomix 230
Page 2: ......
