38
Original operation manual
AIRCOMBI
AirCombi_BAoDB_en_1701 • rs
Maintenance
6.1 Regular inspections
The machine has to be examined and serviced by an expert regularly:
➤
before initial commissioning,
➤
after the modification or repair of parts of the system, which could affect
safety,
➤
after work breaks longer than 6 months,
➤
but at least every 12 months.
For decommissioned machines, the inspection can be postponed until the
next commissioning.
The inspection results must be recorded in writing and kept until the next in-
spection. The inspection report or a copy of it must be available at the place
of use of the machine.
6.2 Maintenance plan
The information in the maintenance plan is a recommendation. The
intervals may vary depending on the condition of materials used and the
outside influences.
Time frame
Activity
For further reading
Prior to each commissioning Check the lubricant level in the fog oiler
Chap. 6.3.1 on page 39
Check the release agent level in the high
pressure pump
Chap. 6.4.1 on page 41
1 time per week
Checking and adjusting the fog oiler
Chap. 6.3.2 on page 40
Checking and cleaning the water
separator
Chap. 6.3.3 on page 40
Visual inspection of the compressed air
and material hoses
every 50 operating hours
Check release agent of the high pressure
pump for material residues
Chap. 6.4.2 on page 41
every 3 years
Inspection of the compressed air and
material hoses by an expert and replace-
ment if necessary
