22
Original operation manual
2K GEL UNIT
2KGel_14025_25015_BAoDB_en_1701 • rs
Transport, installation, and assembly
Safety measures at the installation site:
➤
For safe operation of the machine, stability and sufficient free space must
be ensured.
➤
Keep the working area clean, especially all walking and standing areas.
Remove any spilled material and cleaning agents immediately.
➤
In order to prevent harm to health and damage to property, ensure sufficient
ventilation and airing of the workplace. At least 5-times air exchange per
hour must be guaranteed.
➤
Always observe the processing instructions of the material manufacturer.
➤
Even if there are no legal regulations for the low-mist injection process
itself, dangerous cleaning agent vapors and material particles should be
extracted.
➤
Protect all items neighboring the object against possible damage due to
paint mist.
4.3 Assembly
WARNING
If untrained personnel carry out assembly work, they endanger themselves
and others, as well as risking the operational safety of the machine.
➤
Electrical and electronic parts may only be installed by specialist
personnel with electrical training - all other parts, such as for example,
the material hose and mixing unit, may only be installed by personnel
trained for this.
WARNING
During installation work ignition sources may arise (e.g. due to mechanical
sparks, electrostatic discharge, etc.).
➤
Carry out all assembly work outside of potentially explosive areas.
Prior to commissioning, correctly refit any parts or equipment items removed
for transport purposes, as required for the intended use.
For correct connection of the material lines and the suction hoses, the following
labeling was carried out on the unit and on the material hoses:
➤
blue = component A
➤
red = component B
➤
yellow = flushing agent
The assignment must be maintained for all future applications to avoid
unwanted material reactions and damage to the machine.
