Subject to changes without notice !
Änderungen vorbehalten !
Gearless Lift Machine
WSG-25
Operating Instructions
EN
Code: GM.8.002673.EN
Date:
07. May 2019
Version: 0.13a
Page: 7
4. Handling
4.1. Transport and storage
•
Climate class: 2K3 according EN 60721
•
Transport temperature: -20°C bis +60°C, max. 20 K/hour fluctuated
•
Transport air humidity: max. relative humidity 85 % at 20°C (no moisture condensation)
•
The lift machines leave the factory in perfect condition after being tested. Make a visual check for any external
damage immediately upon their arrival on site. If any damage is found to have occurred in transit, make a notice of
claim in the presence of the carrier. If appropriate, do not put these machines into operation.
•
Observe the relevant safety regulations and take the centre of gravity into account when handling the lift machines.
•
Do not expose the motor to any shocks or impact.
•
Check that the eyebolts are tightly fitted before using them and use only suitable lifting equipment.
WARNING
f
The eyebolts are designed for the specified machine weight, i.e. additional loads must not be applied. Danger of
breakage!
4.2. Storage
•
Climate class: 2K3 nach EN 60721
•
Storage tempera ture: -20°C to +60°C, max. 20 K/hour fluctuated
•
Storage air humidity: max. relative humidity 85 % at 20°C (no moisture condensation)
•
Store the motors only in closed, dry, dust-free, well-ventilated and vibration-free rooms. Do not store lift machines in
the open air. Bright parts are not sufficiently preserved to withstand extended periods of exposure.
NOTICE
f
Avoid excessive storage periods (recommendation: max. one year).
f
After prolonged storage (>3 months), rotate the motor in both directions at a low speed (< 20 min
-1
) to allow the
grease to distribute evenly in the bearings. The ropes must not be fitted.
•
Measure the insulation resistance before initial operation of the machine. If the value has dropped below 1 kΩ per volt
of rated voltage, the winding needs to be dried (insulation meter voltage: 1,000 V DC).
Unpacking
•
Dispose of the packaging material in an environmentally friendly manner or reuse it.
•
Any special transport aids or shipping braces are left with the customer.
4.3. Disposal
•
The lift machines consist of different materials. A waste separation of those different material components has to be
done.
•
The disposal must be professional and environmentally friendly according to law.
