Gearless Lift Machine
WSG-S2.3
Operating Instructions
Seite/page
28
Datum/date
08.10.2013
Stand/version
0.8
Änderungen vorbehalten!
Subject to changes without notice!
11.3. Brake manual release
The brake can be fitted with
a manual brake releasing
device on customer request.
The device can also be retro-
fitted.
The standard length of the
Bowden cable is
3 m
. Other
lengths on request.
195 (WSG-S2)
180 (WSG-S1)
48,5
• Insert the Bowden cable into the lever (12.1) and the
lever block (508 754).
• Caution: The Bowden cable must only be installed in
wide arcs (bending radius > 0.5 m, if possible).
Put no loops !
Installation:
Install the manual brake releasing device with the brake
disconnected from the power supply.
• Lock the car and the counterweight. Ensure that the
required safety measures are observed for the lift system.
• Install the manual lifting lever (12.1) on the brake as
described in the brake operating instructions. Adjust the
Bowden cable on the lever block.
Lever block
508 754
Bowden cable
1
12.4
12.6
12.7
12.8
12.1
Alternatively, another simple version of the manual
releasing device is available for lifts with a machine
room.
Ringschrauben
Eyebolts
Hebel
Lever
Lüften
Release
