WITTUR sematic SRS DC-PWM, Instruction Manual

Page: 23 / 28

23
www
.wittur
.com
Changes can be made without notice
PM.2.004922.EN - 810-000-000 SRS DC-PWM
©
· Edition 22 July 2020
− “BACK”: Press key F1 to restore the menu PROFILE SETTINGS
− “MENU”: Press key F3 to restore the MAIN MENU
8.5.2 SKATE TYPE (select by keypad)
8.5.3
• For the meaning of thsi parameter see point “6.1 Reversing System Force” a pag. 15
• Using keys
ã
and
ä
run through menu GENERAL OPTION selecting SKATE TYPE
• Press Ok to confirm the chioce
• The display confirm the following option:
− Standard skate
− EXP skate
− EXP-B skate
• Using keys
ã
and
ä
select the required option and press Ok to confirm.
• Keeping the same values on the screen, press OK to confirm the following options:
•
− Skate space
− Skate low speed OP
− Skate low speed CL
− Disable reversing space
− OP Accell. Start
− CL Decell. end
• The display will show the confirmed "skate type" and the controller will store the settings coming back to the menu "General
option"
Following options are available:
• "Back": pushing key F1 go back to "Main Menu"
• "Menu": pushing key F2 go back to "Main Menu"
8.5.4 CLOSING REST TYPE (select by keypad)
• For the meaning of thsi parameter see point “6.5 Closing Rest type (Instruction with handset)” a pag. 16
• Using keys
ã
and
ä
run through menu GENERAL OPTION selecting CLOSING REST TYPE
• Press Ok to confirm the chioce
• The display confirm the following option:
− Closed skate
− Open skate
• Using keys
ã
and
ä
select the required option and press Ok to confirm.
• Keeping the same values on the screen, press OK to confirm the following options:
•
− PM ritardo attivazione
− PM apertura scivolo
− PM errore di posizione
• The display will show the confirmed "CLOSING REST TYPE" and the controller will store the settings coming back to the menu
"General option"
Following options are available:
• "Back": pushing key F1 go back to "Main Menu"
• "Menu": pushing key F2 go back to "Main Menu"
8.5.5 MOTOR (select by keypad)
For the meaning of this parameter see point “6.6 Motor (Instruction with handset)” a pag. 16
• Using keys
ã
and
ä
run through menu GENERAL OPTION selecting MOTOR
• Press Ok to confirm the chioce
• The display confirm the following option:
− DC-PWM B105AANX
− DC-PWM B105AAXX
• Using keys
ã
and
ä
select the required option and press Ok to confirm.
• Keeping the same values on the screen, press OK to confirm the following options:
8.5.6 MAX CURRENT END CH (select by keypad)
For the meaning of this parameter see point “6.7 Max current end CL (Instruction with handset)” a pag. 16
• Using keys
ã
and
ä
run through menu GENERAL OPTION selecting MAX CURRENT END CH
• Press Ok to confirm the chioce
• The display confirm the following option:
− OFF
− ON
• Using keys
ã
and
ä
select the required option and press Ok to confirm.
• Display wills howthe parameter's value "Max current end CH"confirmed and the controller will store the settings coming back
"General options"
Following options are available:
"Back": pushing key F1 go back to "Main Menu"