9
www
.wittur
.com
© WI
TTUR • All rights r
eser
ved
PM.2.004921.EN - 808-001-000 SDS
©
rel 3 · Edition 22 July 2020
Drive - Instruction Manual
1 PREFACE
This manual has been drafted taking into account that the Company installing genuine Sematic products will comply with the following
necessary requirements:
•
personnel responsible for the installation and/or maintenance of the doors must be familiar with the General and Specific
regulations in force on the subjects of work safety and hygiene (89/391/CEE - 89/654/CEE - 89/656/CEE);
•
personnel responsible for the installation and/or maintenance must be familiar with the Sematic product and must have been
trained by Sematic or by an authorized Sematic agent;
•
installation equipment used must be in good working order with all measuring instruments calibrated (2009/104/EC).
Sematic:
•
undertakes to update the present manual and send the customer copies of all new updates together with material;
•
within its continuous product improvement policy, reserves the right to make changes to the designs and materials of its products.
Sematic will give an agreed reasonable time to all its customers to allow them to adapt to the new changes their complementary
current constructions;
•
guarantees a good performance only of the original parts sold directly and correctly installed.
Therefore:
parts manufactured and/or added to the Sematic product without having it checked by Sematic, or non-original parts based upon a
Sematic design (even if supplied by authorised agents) cannot be considered under guarantee since the following conditions have not
been ensured:
1.
Quality control of raw material supply
2.
Process control
3.
Product control
4.
Conformity tests according to Sematic specifications
Furthermore, Sematic
•
guarantees the performance life of its products only if correctly stored (indoors storage at temperatures ranging between -10 and
+60 °C out of direct sunlight) and correctly installed;
•
guarantees the perfect performance of the products installed in environments with temperatures between -10 and +60 °C and with
a non-condensing, relative humidity level inbetween 20% and 80%. (Special note: for temperatures and humidity rates outside these
ranges, please consult our Technical Dept.)
The product is compliant with the following EU Directives:
•
98/37/CE Machinery Directive and subsequent modifications (when applicable)
•
2014/33/EU Lifts Directive
•
93/68/CEE Markings
•
90/269/CEE Heavy loads handling
•
Noise (Acoustic emission) 86/188/CEE modified according to Directive 98/24/CEE
•
Electromagnetic compatibility 2014/30/EU
•
Low Voltage Directive 2014/35/EU
and with the following particular standards:
•
EN81-20 & 50;
•
AS1735;
•
EN12015/EN12016;
•
ASME A17.1
•
UL508C;
•
GB 7588 + XG1
The present document has been drafted in accordance with EN13015
Also evaluate in accordance with ANSI/ASME A17.1 -2013-10-21 and A17.5-2014-08-01
Also evaluate in accordance with CAN/CSA B44,and B44.1
Taking into account, during all project planning, the Risk Assessments relating to:
a.
RISKS OF MECHANICAL HAZARDS
•
Squeezing during operations
•
Squeezing after Trapping caused by friction (glass panels)
•
Cuts caused by sharp edges, or static sharp pieces
b.
RISKS OF ELECTRICAL HAZARDS
•
Persons in contact with energized parts (direct contact)
•
Persons in contact with parts that become energized due to a fault (indirect contact)
c.
RISKS OF OVERHEATING
d.
RISKS GENERATED BY NOISE
e.
RISKS GENERATED BY VIBRATION
f.
RISKS GENERATED BY MATERIALS AND SUBSTANCES
