Home Lift - Elevating platform
Test instructions
Subject to change without notice!
EXCELLENCE IN COMPONENTS
Date
07/10/2011
Sheet
4
Version
11117320015V02
Approved
ISC
Original instructions
leaflet enclosed as Annex 1 for
using
lifting
platforms
for
conveying passengers also refers
this to.
Beyond the operating instructions,
please also bear in mind the
generally
applicable
national
statutory
and
miscellaneous
regulations on accident prevention
and environmental protection. The
assembly instructions should also
include
special
operating
conditions
such
as
work
organization, company processes
and staff. Finally, please comply
with the supervisory and reporting
obligations and instruct your
employees to comply with them as
well.
3.1.1. Safety principles
The complete lifting platform system has been
design tested pursuant to EN81-41 and
Machine Directives 98/37/EC and 2006/42/EC.
Wittur cannot accept any warranty for safety
components and parts not included in Wittur's
scope of delivery or for the way they mesh
with Wittur's component in the system.
This lifting platform is state-of-the-art and
built according to the recognised safety rules
for lifting platforms. Nevertheless, there may
be hazards to life and limb of users or third
parties or the lifting platform or other
property may be impaired if it is not used as
intended.
The lifting platform should only be operated as
intended in flawless technical condition
following the operating instructions. Please
also be safety-conscious and aware of
potential hazards. The assembly company or
service
company
should
eliminate
malfunctions that could impair safety.
Hazard from damaged components:
The lifting platform should be shut down if
there are malfunctions that cause the lifting
platform to move in an unintended fashion,
that cause the load suspension device or
counterweight to fall, if the door safeties fail
or if there is a fire in the platform well or drive
room. Only put the lifting platform back into
service when an expert has checked the
platform or the components affected to see if
they are in proper condition and has issued a
certificate on the results.
Shut the lifting platform down
with malfunctions
Follow this procedure:
- Everyone has to leave the car. Then check to
see whether there are passengers in the car.
- ensure that the car cannot be switched on
again.
- after shutting the lifting platform down and
securing the hazardous area, notify the service
company immediately.
- put signs on the platform well doors to warn
people that the lifting platform is shut down.
3.1.1.1. Malfunctions with an impact on
safety
Malfunctions have an impact on
safety if:
- The car starts while a shaft door is open
- The shaft door can be opened when the car is
outside of the unlocking zone of this door.
- The car starts up when the car door is
opened.
- The lifting platform does not have its normal
stopping levelling at the stops.
- The emergency call equipment does not
function and the signs on the main entrance
are not legible.
- The glazed shaft walls, shaft doors, car doors
or the car itself are damaged.
- The emergency brake switch or the door
open switch does not function.