6
Installation instructions Primor
4.3 Mounting input unit
4.3.1 Drill pattern Primor FE (lock is closing towards the right) - (closing towards the left inversely)
11,5
100
30
• From the front 3 threaded holes M5 with sufficient thread depth and 1 through-hole (opening for cable/Spindle)
have to be drilled into the safe door.
4.3.2 Plug position Primor FE
Lock
• Connect the plug of the cable with the plug on the circuit board. Attention: Don’t put the connection cable under tensile stress.
• Fix the input unit from the front with the enclosed cylinder screws M5.
• Install covering caps and battery compartment cover (see 4.2.1).