Wittke TWIN AUGER, Operator'S Manual

Page: 54 / 87

46 Controls and Indicators
Figure 3-18 Mirror light
Canopy Light Switch (optional)
This switch (see Figure 3-15) turns on/off the canopy light if installed on your vehicle.

Press the switch once to turn ON the canopy light (switch turns green).

Press the switch again to turn OFF the canopy light (switch turns blue).
Strobe Light Switch (optional)
This switch (see Figure 3-16) turns on/off the strobe light if installed on your vehicle.

Press the switch once to turn ON the strobe light (switch turns green).

Press the switch again to turn OFF the strobe light (switch turns blue).
Work Lights Switch (optional)
This switch (see Figure 3-16) turns on/off work lights if installed on your vehicle.

Press the switch once to turn ON work lights (switch turns green).

Press the switch again to turn OFF work lights (switch turns blue).
Auxiliary Controls Switch (optional)
Auxiliary controls, if installed on your unit, are located outside, directly on the front left-hand side tire
guard (see Figure 3-19). For these controls to be enabled, the operator must press the Auxiliary
Controls switch on the control panel (see Figure 3-15).

A green switch means these controls are enabled.

A blue switch means these controls are disabled.
Auxiliary controls include a dual handle joystick (see Figure 3-19) to operate both the forks and the
arms and a screw control station to operate both pod screws (see Figure 3-19). A speed-up switch is
also provided to speed up the rotating speed of both screws and the raising/lowering of the arms
(see Figure 3-19).