Wittke TWIN AUGER, Operator'S Manual

Page: 39 / 87

3
Controls and
Indicators
The W
ITTKE
T
WIN
A
UGER
™ has a series of controls
and indicators that allow easier operation of the
different functions that come with the vehicle. These
controls and indicators are mainly located on the in-
cab control panel and on the dashboard. Other
controls are found outside the cab, just above the front
left-hand side tire guard and another near the
retractable ladder.
Labrie’s Multiplexed System
Labrie has equipped your W
ITTKE
T
WIN
A
UGER
™ unit
with a CAN bus-based multiplexed system, which
integrates a monitor, a control panel and a set of
electronic controllers. This whole system has been
designed to help you operate your unit in an efficient
and easy way. Labrie’s multiplexed system is reliable
and safe, and it requires less wiring harnesses to
operate. It can also monitor various function status of
the truck and display warning and caution messages.
Through its monitor (see Figure 3-1), Labrie’s
multiplexed system informs you of any malfunction
that may occur during the use of the truck. Various
caution and warning messages can be displayed on the
monitor, depending on the seriousness of the
situation. Yellow-highlighted messages indicate that
caution should be used while red-highlighted messages
indicate a warning situation that must be dealt with
quickly.
Figure 3-1 Monitor