Wittke TWIN AUGER, Operator'S Manual

Page: 12 / 87

4 Introduction
Figure 1-7 Ladders
On the left-hand side of the pod not far from the loading arm is the loading/unloading connection
area (see Figure 1-8) where hoses and connectors are connected to permanent piping and ports.
These hoses and connectors are to be removed and placed in the bracket holes (see Figure 1-8)
before rolling off the food waste pod.
Figure 1-8 Loading/unloading connection area
Just above left of the loading/unloading connection area there is a yellow camera cable (see Figure
1-8). This cable must also be disconnected before rolling off the pod.
The W
ITTKE
T
WIN
A
UGER
™ is fitted with a chain-gear system (see Figure 1-9) that pulls or pushes
the food waste pod during loading or unloading. A system of automatic and manual locks (see Figure
1-10) is also provided to keep the pod in place during collection and transportation.
Figure 1-9 Chain-gear system
Bracket holes
Internal
camera cable
Hydraulic
fittings