64
Controls and Indicators
If this indicator light is green, this indicates that the packer is completely retracted.
If this indicator light is red, this indicates that the packer is not completely retracted.
N
OTE
:
The packer must be completely retracted to allow dumping into the hopper.
Hopper Door Open Indicator Light
This indicator light is located on the in-cab control panel (see Figure 3-15).
If this indicator light is green, this indicates that the hopper door is closed.
If this indicator light flashes red, this indicates that the hopper door is not closed.
N
OTE
:
No hydraulic function is possible when the hopper door is not closed. In such a situation, the
pump switch on the control panel (see Figure 3-14) also flashes red.
Arms Not Stowed Indicator Light
This indicator light is located on the in-cab control panel (see Figure 3-15).
If this indicator light is green, this indicates that the arms and forks are adequately stowed.
If this indicator light is red, this indicates that the arms and forks are not adequately stowed.
I
MPORTANT
:
Never drive this vehicle when this indicator light is red-lighted.
In-Cab Packer Control Station
The W
ITTKE
™ has a packer control station located on the cab console. Here is a description of the
three buttons found on the packer control station.
Stop Push-Button (red)
The Emergency Stop button (see Figure 3-24) will stop all hydraulic functions on the truck (tailgate,
packer, etc.). By pressing the red button, the packer will stop where it is. The red button has to be
manually pulled back to reactivate the hydraulic system.
Summary of Contents for StarLight
