Wittke StarLight, Operator'S Manual, Page: 104 / 108

94 Operating the W
ITTKE
™
Figure 4-11 Optional clean-out door
9.
Remove all refuse behind the packer blade including the rails and inside header.
N
OTE
:
Pressurized water can be used if necessary.
10.
Inspect the condition of the hopper area and record any problems or concerns in a vehicle
condition report.
11.
Once the cleaning is done, exit the hopper. Close and secure the side access door.
12.
Reverse the lockout/tagout procedure (see Locking Out and Tagging Out the Vehicle on page 38).
Canopy Sweeper (optional)
Fixed to the fork torque tube and made of rubber, the optional canopy sweeper (see Figure 4-12) is
used to remove debris that may fall onto the canopy from a container on its way up. The debris that
remains on the canopy can be swept by a second lifting of the arms after the empty container has been
put back on the ground and released. The forks must be fully retracted in order to sweep the canopy
properly.
Figure 4-12 Canopy sweeper