manualshive.com logo in svg

Wittke StarLight, Operator'S Manual, Page: 75 / 108

Share
Download
Wittke StarLight Operator'S Manual Download Page 75

Controls and Indicators

65

Figure 3-24      Stop push-button

Pack Push-Button (green)

This push-button moves the packer blade to the rear of the hopper when you are packing a load or to 
the rear of the body when you are ejecting a load at the landfill.

Š

Press this button once to activate the packer blade (tailgate must be closed and locked). When the 
tailgate is closed and locked, the packer returns automatically to the “home” position.

Š

Press and hold this button to eject the load (tailgate must be fully open).

Š

Release this button to stop the packer blade during the ejection (full eject mode only).

Figure 3-25      Pack push-button

Retract Push-Button (yellow)

This push-button (see  Figure 3-26) returns the packer blade to its “home” position when you are 
packing a load or you are ejecting the load at the landfill.

Š

Press this button once to bring the packer blade back to the front-end of the hopper (tailgate must 
be closed).

Š

Press and hold this button to bring the packer blade back to its “home” position during the 
ejection cycle (tailgate must be open).

Summary of Contents for StarLight













































































































Reviews:

No comments