Project planning guide
cyber
®
reaction wheel 2
en-36
Doc. no.: 5022-D060586
Revision: 02
3.6 Firmware update
Download the required firmware package from the download portal.
3.6.1 Firmware update with the cyber
®
reaction wheel assistant
The update process is described in the CHM help.
For this purpose,
-
open the cyber
®
reaction wheel assistant
-
open the CHM-Help by pressing F1
-
enter firmware update in the search screen
•
Notice:
During the firmware update, the I2C address is reset to the default value 0x77. After the
firmware update has been completed, the desired I2C address, see section 2.3.4.1,
must be restored.
3.6.2 Firmware update with ADCS
The procedure for this is described in the Interface Control Document in the
UserInterface_FirmwareUpdate() function.
