Project planning guide
cyber
®
reaction wheel 2
en-24
Doc. no.: 5022-D060586
Revision: 02
2.3.4 Setting of communication parameters
2.3.4.1 Setting the I2C address
1) Open the CHM-Help
2) Search index 3E06
3) Set the required address according to the parameter description in CHM-Help or the
figure below
Figure 1.14: Example of the 0x3E06 parameter for setting the I2C address in the CHM-Help of the cyber
®
reaction
wheel assistant
4) Save to EEPROM: This saves the address permanently in the reaction wheel.
5) Restart Drive: The reaction wheel starts with the new address.
