cyber
®
reaction wheel 2
Project planning guide
Revision: 02
Doc. no.: 5022-D060586
en-39
4.4 Requirements for power adapters and supply voltage
When dimensioning the power supply units, observe the electrical characteristics specified in
table 4. Also take into account operation of several reaction wheels at the same time.
4.5 Installation space
The installation size must be sufficiently large.
A minimum distance of 1 mm on all sides of the drive system must be observed.
4.6 Mounting position
Any mounting position can be selected.
4.7 Cooling
Sufficient thermal conduction for cooling of the drive system must be ensured at the
installation location.
4.8 Maintenance
No maintenance is required.
4.9 Software-side integration in ADCS
For integration of the reaction wheel into an ADCS, Wittenstein provides a communication stack
including a sample or reference project for download.
The procedure is described in detail in section 3.4. Information on integration of the software
stack can be found in section 3.4.4.
