IMPORTANT
Because of styling and manufacturing differences in golf carts, the Wittek
vehicle attachment bar may not clear front wheels and tires, and a special
extension/adapter bracket will be required.
If optional adapter bracket wasn’t purchased, be sure to mount the
attachment bracket onto the frame or on a sturdy portion of the frame
on the golf cart.
Mounting the vehicle attachment bar
1. Position the vehicle attachment bar in the
desired area on the golf cart.
2. Mark the location of the mounting bolt.
3. Drill a hole to accommodate the mounting bolt.
4. Install the vehicle attachment bar.
5. Remove the connecting rods from vehicle attachment
bar and align the mounting sleeves.
6. Replace the connecting rods and retaining pins.
At this time, place the picker baskets in the appropriate spaces
and make sure to grease wheel, fittings etc...
The Range Rover Picker is now ready for operation.
Continue if assembling a 5-Gang Picker
1. Remove the connecting rods from the left and
right wings and align the mounting sleeves to the
appropriate side on the drawbar.
2. Insert the connecting rods through the
sleeves and replace retaining pins.
3. Remove retaining pin and assembly pin from
post assembly bracket (the pin that is
mounted horizontally).
4. Insert mounting sleeve (on frame) in between
post assembly bracket.
5. Insert assembly pin through post assembly
bracket and mounting sleeve.
Installing the 5-gang additional parts:
The Range Rover picker is now
completely assembled and ready to
be mounted to the drive vehicle.
6. Replace retaining pin.
7. Remove shaft collar and retaining pin
from the vertical rod of the post
assembly bracket.
8. Insert post assembly bracket upward
through the sleeve of the wing.
9. Replace shaft collar and retaining pin.
Repeat process (3 − 9) for
other frame section.
10.
5
Summary of Contents for Range Rover 3 Gang
Page 2: ...3 Gang 5 Gang 2...
