Witt W5-450MF, User Manual

Page: 74 / 86

73
Cleaning and maintenance
Caution!
Before carrying out any work, the appliance must be disconnected from the electricity supply.
The inside of the oven should be cleaned to remove food and grease deposits, which can give off smoke or
odors and cause stains to appear.
•
With the oven cold and for enameled surfaces (e.g. the floor of the oven) use a nylon brush or sponge
with warm soapy water. If using special oven cleaning products, use only on enameled surfaces and
follow the manufacturer’s instructions.
•
Clean the outside of the oven and the accessories with warm soapy water or with a mild detergent.
•
For stainless steel surfaces, clean with care and only use sponges or cloths that cannot scratch them, or
use a specialist stainless steel cleaner – always follow the manufacturer’s instructions.
Cautions
•
Do not clean the inside of your oven with a steam or pressurized water jet.
•
Do not use either metallic scouring pads or any material that could scratch the enamel.
•
For your own safety, never switch the oven on without the back panel that protects the fan.
•
Do not remove the control knobs when cleaning the outside of the oven.
Instructions for Removing the Supports and the Back Panel
(W5-450MF and W5-600MF)
1. Remove the accessories from inside the oven.
2. Ease out the supports (D), releasing them from the bolt (E)
3. To disassemble the back panel, remove screw.
4. Proceed in reverse order to re-assemble.