Witt Sensoric LIGI-10 FLEX Series, Original Operating Instructions

Page: 12 / 24

Sensoric
Sensoric GmbH Berlin © www.witt-sensoric.de
12
Sensoric
Maintenance and repair
The safety light curtain does not have any wearing parts that need to be maintained.
The light entry and exit openings are to be cleaned regularly, depending on the dirt
that occurs. Use a cloth with soapy water or a water jet for this purpose. High-pres-
sure cleaners, abrasives and organic solvents must not be used.
Check regularly whether the light curtains are correctly aligned. Adjust the alignment
if necessary. The light curtain casing, the optics areas, the plug and the connection
cable are to be checked regularly for damage. Parts with significant damage must be
replaced.
Furthermore please check detection ability on a regular basis as per manual page 11.
If light curtains are replaced, they must only be replaced by identical light curtains
or by other safety light curtains that are intended for the relevant door by the door
manufacturer.
Transmitter and receiver light curtains must only be replaced in pairs so as to ensure
that the same software and hardware status is present.
Repairs must only be carried out by trained personnel.
Versions
Number of channels: From 14 to 70 channels
Connection:
Connection cables
5m and 15m, the total length must not exceed 25m
Connection plug Pig-tail connector with M8 plug, 6-pin, L=130mm