Witt Sensoric LIGI-10 FLEX Series, Original Operating Instructions

Page: 14 / 24

Sensoric
Sensoric GmbH Berlin © www.witt-sensoric.de
14
Sensoric
Technical data
Testing
Reaction of the output after activation of the test input for a free detection zone
Test input
Version Reaction of the output
OSE This version is not tested.
solid state relay SSR
after max. 100ms change from
low resistance (<35
Ω
) to high resistance
Ambient light safety ≥ 100klux
Housing material Aluminium profile, fully filled, with 2K epoxy resin
Connection Pig-tail M8 plug 4-pin, L=130mm
Degree of protection IP67 as per EN 60529
Operating temperature -20 to +60°C
Storage temperature -30 to +70°C
Air humidity Max. 95%
Weight versions dependent
Dimensions versions dependent
Version Normal operation Test/alignment Internal input wiring
T00 <2V >7V 10k
Ω
pull-down resistor to 0V
T05 open
0V...4V or supply
voltage -4V
Reaction of the output after deactivation of the test input for a free detection zone
Version Reaction of the output
OSE Diese Variante wird nicht getestet.
solid state relay SSR
after max. 100ms change from
high resistance to low resistance(<35
Ω
)
switching time Definition
t (turn on delay)
≤
100ms light beam interruption
t (turn off delay) ≤ 800ms uninterrupted detection zone