Translation of the original operating instructions
WITA HE OEM 2 | 40-XX | 60-XX
7.1.1 Craftsman mode, setting of power range
In craftsman mode, the power range can be changed to 4m or 6m.
• The pump must be disconnected from the 230V
mains voltage for at least 15 seconds.
• Connect the pump to the 230V mains voltage.
• Press the
and
buttons simultaneously
within 3 seconds.
• Then release both buttons.
• Select the power range with the
buton:
-4 = 4m
-6 = 6m
• The pump must be disconnected from the 230V
mains voltage for at least 15 seconds.
• Connect the pump to the 230V mains voltage
The setting process is completed. The pump operates now in the selected power range.
If necessary, the pump setting can be adjusted again at any time.
7.2
Control panel and LED display
1. Display the power consumption in watts
2. Display of automatic night setback
3. Button for starting automatic night setback
4. Button for selection of the operating mode
5. Display of activated AUTO Smart Adapt mode
6. Display of the nine operating modes (characteristics)
of the pump
31
1
6
4
3
2
5
Summary of Contents for HE OEM 2 40 Series
Page 62: ...Notatki 62...
